Pullstarter Red - Black Swiing Top-Qaulity! Mono / Vario Vespa Ciao

Pullstarter Red - Black Swiing Top-Qaulity! Mono / Vario Vespa Ciao

• Pull starter set.
• Complete set.
• Easy to assemble! Plug & Play!
• Red - Black model.
• The Pullstarter is suitable for competitions and the highest loads.
• Swiing, A-Quality!

Assembly instructions:

• Start pinion: First clean all mounting surfaces. Then screw the matching counterpart for the recoil starter onto the clutch or variator and tighten the flange nut with liquid locker such as Loctite. Recoil starter: lightly tighten the housing adapter with the supplied motor screws. In the next step, add the cable starter to the round housing and screw it in with the M5 x 45mm screws. Finally, tighten the motor screws.

Starting procedure:

• Before each starting attempt, pull the rope slowly a few times so that the engine runs empty. Then, hold the handle firmly and pull until resistance is met. Now you can finish the starting process with a stronger pull.

Pay attention! When the Pullstarter is installed, the pedal assembly becomes inaccessible (the pedal arms come into contact with the recoil starter housing). Footrests, a longer pedal axle or a pedal axle extension are therefore necessary.

Suitable for:

• Verspa / Piaggio Ciao (Mono / Variomatic drive)