Pinion set Shift Axle 3-Pieces Zündapp

∙ Pinionset shift axle..
∙ 3-Pieces.

Complete set with

∙ Pinion.
∙ Spring.
∙ Nail.

Suitable for:

∙ Zundapp (50cc Models)

Identical to Zundapp article number

267-05.125/126

Cover Crank case Left side Zündapp

∙ Crankcase cover.
∙ Left side.

Suitable for:

∙ Zundapp.

Identical to Zundapp article number

Z284-01.100

Adjusting Piece Foot Gear Axle Zündapp

∙ Adjusting clock foot gear axle.

Suitable for:

∙ Zundapp ( 3 / 4 / 5 Gear Models)

Identical to Zundapp article number

Z267-05.112

Drain plug + Sealing Zündapp

∙ Drainplug + Sealing.

Suitable for:

∙ Zundapp.

Drain plug + Sealing Stainless steel Zündapp

∙ Drainplug + Sealing.
∙ Stainless steel.

Suitable for:

∙ Zundapp.

Kickstarter Complete Zündapp KS80 < 1966

∙ Kick starter / Kickstart pedal / kickstart lever.
∙ Complete.

Suitable for:

∙ Zundapp KS80 (Models up to 1966)

Identical to Zundapp article number

Z267-05.766

Kickstarter Zündapp KS80

∙ Kick starter / Kickstart pedal / kickstart lever.

Suitable for:

∙ Zundapp KS80.

Identical to Zundapp article number

Z314-05.221

Kickstarter Chrome Complere Zündapp

∙ Kick starter / Kickstart pedal / kickstart lever.
∙ Chrome.
∙ Complete.

Complete set with:

∙ Kickstarter.
∙ Groundplate.
∙ Spring.
∙ Lockring.

Suitable for:

∙…

Kickstarter Chrome Complete Zündapp KS125 / KS175

∙ Kick starter / Kickstart pedal / kickstart lever.
∙ Chrome.
∙ Complete.

Complete set with:

∙ Kickstarter.
∙ Groundplate.
∙ Spring.
∙ Lockring.

Suitable…

Kickstarter Chrome KS80 Model Complete Zündapp KS50

∙ Kick starter / Kickstart pedal / kickstart lever.
∙ Chrome.
∙ Model als KS80.
∙ Complete.

Complete set with:

∙ Kickstarter.
∙ Groundplate.
∙ Spring.
∙…

Kickstart Axle Top Racing Zündapp 4 / 5 Gear

∙ Kickstart axle.
∙ Jasil / Top Racing.

Suitable for:

∙ Zundapp 4 / 5 Gear Models.

Kickstart Axle Zündapp 3 Gear

∙ Kickstart axle.

Measurements:

∙ Length total: 125mm.
∙ Diameter: 20mm.

Suitable for:

∙ Zundapp 3 Gear Models.

Identical to Zundapp article number

Z278-05.103

Bearing set Engine Mounts Zündapp Sprinter / HAI / CX / Etc

∙ Rubberset engine mounts / swingarm.
∙ 5 Pieces.

Suitable for:

∙ Zundapp 448 Sprinter.
∙ Zundapp HAI 25/50.
∙ Zundapp CX 25/50.
∙ Zundapp 540 K80…

Cover Engine Model 276 Zündapp

∙ Engine cover.

Suitable for:

Zundapp 267 Engines.

∙ Zundapp 517 KS50.
∙ Zundapp 517 GTS50.

Identical to Zundapp article number

Z267-01.115

Engine Carrier Front side Zündapp KS80

∙ Engine carrier.
∙ Front side.
∙ Bare, without rubbers.

Suitable for:

∙ Zundapp KS80.

Identiical to Zundapp article number

530-18.604

Cooling fan HPI-2Ten Ignition Kreidler / Zündapp

∙ Cooling fan.
∙ HPI 2-Ten ignition.
∙ Aluminium.
∙ Outer diameter Ø 116mm.

Suitable for:

∙ Kreidler (forced cooling)
∙ Zundapp (forced cooling)

Cooling Hose set Top side & Bottom side Zündapp KS50 / 517 Old Model

∙ Cooling hose set.
∙ Bottom & upper side.
∙ Complete with clamps.

Suitable for:

∙ Zundapp KS50 / 517 Old Model.

Identical to Zundapp article…

Cooling Hose set Top side & Bottom side Zündapp KS50 New Model

∙ Cooling hose set.
∙ Bottom & upper side.
∙ Complete with clamps.

Suitable for:

∙ Zundapp KS50 New Model.

Identical to Zundapp article…

Cooling Hose Top side Zündapp 530

∙ Cooling hose.
∙ Top side.

Suitable for:

∙ Zundapp 530.

Identical to Zundapp article number

530-10.117

Cooling Hose Bottom side Zündapp 517 / 530

∙ Cooling hose.
∙ Bottom side.

Suitable for:

∙ Zundapp 517 / 530.

Identical to Zundapp article number

Z517-10.211

Spring Kickstart Zündapp

∙ Kickstart spring.

Suitable for:

∙ Zundapp Models.

Identical to Zundapp article number

Z267-05.328

Engine bracket set 4-Pieces Zündapp 517

∙ Engine mounting set.
∙ 4-Pieces.

Complete set with:

∙ Upper engine bracket.
∙ Left engine bracket.
∙ Right engine bracket.
∙ Exhaust bracket.

Suitable for:

∙ Zundapp…

Motorsteun set 4-Delig Zündapp 529

∙ Engine mounting set.
∙ 4-Pieces.

Complete set with:

∙ Upper engine bracket.
∙ Left engine bracket.
∙ Right engine bracket.
∙ Exhaust bracket.

Suitable for:

∙ Zundapp…

Engine bracket Top side Zündapp 529 / 530

∙ Engine bracket.
∙ Top side.
∙ Wide model, intermediate side 13cm.

Suitable for:

∙ Zundapp 529.
∙ Zundapp 530.

Identical to Zundapp article number

Z529-18.607

Engine bracket Left side Zündapp 517

∙ Engine bracket.
∙ Left side.

Suitable for:

∙ Zundapp 517.

Identical to Zundapp article number

Z517-18.600

Engine bracket Right side Zündapp 517

∙ Engine bracket.
∙ Right side.

Suitable for:

∙ Zundapp 517.

Identical to Zundapp article number

Z517-18.601

Engine bracket Left side Zündapp 529 / 530

∙ Engine bracket.
∙ Left side.

Suitable for:

∙ Zundapp 529.
∙ Zundapp 530.

Identical to Zundapp article number

Z529-18.605

Engine bracket Right side Zündapp 529 / 530

∙ Engine bracket.
∙ Right side.

Suitable for:

∙ Zundapp 529.
∙ Zundapp 530.

Identical to Zundapp article number

Z529-18.606

Engine bracket Zündapp 517 / 529 / 530 / KS80 / K80

∙ Engine bracket.

Suitable for:​

A.o. Zundapp KS80 & K80 Engines.

∙ Zundapp 517.
∙ Zundapp 529.
∙ Zundapp 530.

Identical to Zundapp article number

530-10.615

Mounting Rubber Engine Zündapp 517

∙ Engine mounting rubber.
∙ A Piece.

Measurements:

∙ Length totaal: 34mm.
∙ Outer diameter: 23mm.
∙ Inner diameter: 16mm.

Suitable for:

∙ Zundapp 517

Identical to Zundapp…

Mounting Rubber set Engine 2-Pieces Zündapp 529 / 530

∙ Engine mounting rubber.
∙ 2 Pieces.

Measurements:

∙ Length total: 34mm.
∙ Outer diameter edge: 40mm.
∙ Outer diameter: 34mm.
∙ Inner diameter: 26mm.

Suitable…

Ignition Lid Silver Zündapp 517 4 / 5 Versnellingen

∙ Ignition cover.
∙ Aluminium.
∙ Silver.

Afmetingen:

∙ Length total: 265mm.
∙ Distance between mounting holes: 87mm.

Suitable for:

∙ Zundapp 517 4 Gear…

Ignition Lid Silver Zündapp KS100 4 Gear

∙ Ignition cover.
∙ Aluminium.
∙ Silver.

Measurements:

∙ Length total: 265mm.
∙ Height rear side: 145mm.
∙ Distance between mounting holes: 87mm.

Suitable for:

∙ Zundapp…

Ignition Lid Silver Zündapp KS100 5V / KS125 / KS175

∙ Ignition cover.
∙ Aluminium.
∙ Silver.

Measurements:

∙ Length total: 275mm.
∙ Distance between mounting holes: 86mm.

Suitable for:

∙ Zundapp KS100 5 Gear…

Ignition Lid Black 3 Serie Engines Zündapp KS80 / K80 / SX80

∙ Ignition cover.
∙ Aluminium.
∙ Black.

Geschikt voor:

∙ Zundapp KS80 AC.
∙ Zundapp KS80 LC.
∙ Zundapp K80.
∙ Zundapp SX80.
∙ Zundapp 3-Serie Enignes…

Ignition Grommet Rubber Single Model Zündapp

∙ Ignition grommet rubber.
∙ Single model.

Suitable for:

∙ Zundapp Models.

Identical to Zundapp article number

Z283-07.100

Ignition Grommet Rubber Double Model Zündapp 4 / 5 Gear

∙ Ignition grommet rubber.
∙ Double model.

Suitable for:

∙ Zundapp 4 / 5 Gear Models.

Identical to Zundapp article number

276-07.101

Ignition Grommet Rubber Zündapp 3 Gear

∙ Ignition grommet rubber.

Suitable for:

∙ Zundapp 3 Gear models.

Identical to Zundapp article number

Z265-07.100

Ignition Grommet Rubber Zündapp K80 / KS80

∙ Ignition grommet rubber.

Suitable for:

∙ Zundapp K80.
∙ Zundapp KS80.

Identical to Zundapp article number

Z265-07.100

Ignition Grommet Rubber 284 Engine Zündapp KS50 / CS50 / CX50 / Etc

∙ Ignition grommet rubber.

Measurements:

∙ Length: 39mm.
∙ Width: 15mm.
∙ Diameter hole: 11mm.

Suitable for:

Models with 284 Engine.

∙ Zundapp…

Primary Axle Top Racing! Zündapp 4 Gear

∙ Primary axle.
∙ 11-17-22-25.
∙ Jasil / Top Racing!

Suitable for:

∙ Zundapp 4 Gear Models.

Identical to Zundapp article number

Z276-05.613

Primary Axle Zündapp 5 Gear

∙ Primary axle.
∙ Christmas tree model.

Suitable for:

∙ Zundapp 5 Gear Models.

Identical to Zundapp articel number

Z283-05.606

Filler Ring Kickstartpedal 28.3mm x 34mm x 0.5mm Zündapp 517

∙ Filler Ring kickstart pedal.
∙ 28.3mm x 34mm x 0.5mm.

Suitable for:

∙ Zundapp 517.

Identical to Zundapp article number

Z283-05.156

Spring Gear Shaft Zündapp

∙ Spring gearshaft.

Suitable for:

∙ Zundapp Models.

Identical to Zundapp article number

Z278-05.100

Spring Gear Shaft Old Model Zündapp

∙ Spring gearshaft.
∙ 2 Windings.
∙ Old model.

Suitable for:

∙ Zundapp Models.

Identical to Zundapp article number

Z267-05.558

Gear Pin Zündapp 3 / 4 / 5 Gear

∙ Gear pin.

Geschikt voor:

∙ Zundapp 3 / 4 / 5 Gear Models.

Identical to Zundapp article number

267-05.586

Gear Pin set + Spring Zündapp 3 / 4 / 5 Gear

∙ Gear pin set.
∙ 2 Pieces with spring.

Suitable for:

∙ Zundapp 3 / 4 / 5 Gear Models.

Identical to Zundapp article number

267-05.586 / 267-05.585

Gear Pedal Chrome 3 Serie Engines Zündapp 3 / 4 / 5 Gear

∙ Gear pedal.
∙ Chromed.
∙ Complete with rubber.

Suitable for:

3 Serie 3 / 4 / 5 Gear Engines.

∙ Zundapp 314.
∙ Zundapp 316.
∙ Zundapp 317.

Gear Pedal Curved Chrome Zündapp

∙ Gear pedal.
∙ Curved model.
∙ Chrome.

Suitable for:

∙ Zundapp Models.

Identical to Zundapp article number

Z282-05.700

Gear Pedal Straight Chrome Zündapp

∙ Gear pedal.
∙ Straight model.
∙ Chrome.

Suitable for:

∙ Zundapp Models.

Identical to Zundapp article number

Z267-05.748

Gear Pedal Chrome Zündapp KS80 Super

∙ Gear pedal.
∙ Chrome.

Suitable for:

∙ Zundapp KS80 Super.

Gear Pedal Chrome LC Watercooled Zündapp KS80

∙ Gear pedal.
∙ Chrome.

Suitable for:

∙ Zundapp KS80 LC, Watercooled Models.

Gear Pedal Chrome Zündapp KS100 4 Gear

∙ Gear pedal.
∙ Chrome.

Suitable for:

∙ Zundapp KS100 4 Gear.

Pull Cotter Zündapp 3 Gear Foot Shift

∙ Pullcotter.

Suitable for:

∙ Zundapp 3 Gear - Foot shift.

Identical to article number

Z267-05.106

Pull Cotter Zündapp 3 Gear - Hand shift

∙ Pullcotter.

Suitable for:

∙ Zundapp 3 Gear - Hand shift models.

Pull Cotter Zündapp 4 Gear

∙ Pullcotter.

Suitable for:

∙ Zundapp 4 Gear models.

Identical to Zundapp article number

Z276-05.148

Pull Cotter Zündapp 5 Gear

∙ Pullcoter.

Suitable for:

∙ Zundapp 5 Gear.

Pull Cotter set 3-Pieces Zündapp 5 Gear

∙ Pullcotter.
∙ Met bolt and key.
∙ 3 Pieces.

Suitable for:

∙ Zundapp 5 Gear Models.

Gearbox set Top Racing Zündapp 6 Gear

∙ Gear box set.
∙ 6 Gears.
∙ Top Racing / Jasil.

Complete set met:

∙ Primary axle / Main drive shaft.
∙ Washer 16.5mm x 26mm x 2.0mm.
∙ Shift drum.
∙ Pull cotter.
∙…

Gearbox set 7-Pieces Zündapp 5 Gear

∙ Gear box set.
∙ 7 Pieces.
∙ 5 Gears.

Complete set met:

∙ Primary axle / Main drive shaft.
∙ Selector shaft / Front sprocket axle.
∙ 1st Gear wheel 34.
∙ 2nd Gear wheel…

Oil Gearbox MoS2 500ML Zündapp

∙ Oil.
∙ Special for the gear box.
∙ Contains Molybdenum disulfide ( MoS2 )
∙ 500ML.

Suitable for:

∙ Zundapp Models.

Nut Front Sprocket / Clutch Bell Original! Zündapp 3 Gear

∙ Nut front sprocket / clutch bell.
∙ Original Zündapp!

Suitable for:

∙ Zundapp 3 Gear Models.

Original Zundapp article number

Z265-06.202

Nut Front Sprocket / Clutch Bell Remake Zündapp 3 Gear

∙ Nut front sprocket / clutch bell.
∙ Remake model.

Suitable for:

∙ Zundapp 3 Gear Models.

Identical to Zundapp article number

Z265-06.202

Axle Front Sprocket Zündapp 5 Gear

∙ Axle front sprocket.

Suitable for:

∙ Zundapp 5 Gear Models.

Identical to Zundapp article number

Z283-05.604

Axle Front Sprocket Zündapp 4 Gear

∙ Axle front sprocket.

Suitable for:

∙ Zundapp 4 Gear Models.

Identical to Zundapp article number

Z276-05.900

Axle Front Sprocket Old Model Zündapp 3 Gear Feet shift

∙ Axle front sprocket.

Suitable for:

∙ Zundapp 3 Gear (Old model Foot shift)

Identical to Zundapp article number

Z276-05.901

Axle Front Sprocket New Model Zündapp 3 Gear Feet shift

∙ Axle front sprocket.

Suitable for:

∙ Zundapp 3 Gear (New model Foot shift)

Identical to Zundapp article number

Z278-05.902

Axle Front Sprocket Old Model Zündapp 3 Gear Hand shift

∙ Axle front sprocket.

Suitable for:

∙ Zundapp 3 Gear (Old model Hand shift)

Identical to Zundapp article number

Foot Gear Axle Bare Zündapp 5 Gear

∙ Foot shift axle.
∙ Bare.

Suitable for:

∙ Zundapp 5 Gear models.

Identical to Zundapp article number

Z283-05.611

Foot Gear Axle Bare Zündapp 3 / 4 Gear

∙ Foot shift axle.
∙ Bare.

Suitable for:

∙ Zundapp 3/ 4 Gear models.

Identical to Zundapp article number

Z267-05.654

Gear Sprocket 30 Teeth 2e Gear Zündapp 5 Gears

∙ Gearsprocket.
∙ 2e Gear.
∙ 30 Teeth.
∙ Top Racing / Jasil.

Suitable for:

∙ Zundapp 5 Gears.

Identical to Zundapp article number

Z283-05.127

Gear Sprocket 35 Teeth 2e Gear Zündapp 4 Gears

∙ Gearsprocket.
∙ 2e Gear.
∙ 35 Teeth.
∙ Top Racing / Jasil.

Suitable for:

∙ Zundapp 4 Gears.

Identical to Zundapp article number

Z277-05.141

Type Plate Engine Zündapp 1970 - 1979

∙ Type tag engine.

Suitable for:

∙ Zundapp (Models 1970 - 1979)

Type Plate Engine Zündapp 1960 - 1969

∙ Type tag engine.

Suitable for:

∙ Zundapp (Models 1960 - 1969)

Notch Nail Type Plate Engine Zündapp

∙ Notch nail.
∙ For mountinh a type plate on the engine.
∙ A Piece.

Suitable for:

∙ Zundapp Models.

Intermediate Plate / Sheet Crank case Old Model Zündapp 1967 - 1976

∙ Intermediate plate / sheet.
∙ For crank case.

Geschikt voor:​

∙ Zundapp (Models 1967 - 1976)
∙ Engine 265 / 266 / 267 / 278, 2 / 3 Gear…

Intermediate Plate / Sheet Crank case New Model Zündapp > 1977

∙ Intermediate plate / sheet.
∙ For crank case.

Geschikt voor:​

∙ Zundapp (Models > 1977)
∙ Engine 278 ,2 / 3 Gear Models.
∙ Engine 276 / 280, 4 Gear…

Bolt set Engine Complete 27-Pieces Zündapp KS80 (314 & 317)

∙ Engine bolt set.
∙ Complete set.
∙ 27 Pieces.

Suitable for:​

∙ Zundapp KS80 (314 & 317 Models)

Bolt set Engine 22-Pieces Zündapp 5 Gear (248)

∙ Enginebolt set.
∙ 22 Pieces.

Suitable for:​

∙ Zundapp 5 Gear (248 Models)

Bolt set Engine Zündapp 5 Gear

∙ Enginebolt set.

Suitable for:​

∙ Zundapp 5 Gear Models.