Woodruff Key Puch / Zündapp / Kreidler

∙ Woodruff / Flywheel Key.
∙ A Piece.

Measurements:

∙ Length: 9.66mm.
∙ Height: 3.7mm.
∙ Width: 3mm.

Suitable for:

∙ Puch Models.
∙ Zundapp Models.
∙ Kreidler Models.

Woodruff Key Clutch Puch Maxi e50

∙ Woodruff key Clutch side.
∙ A Piece.

Measurements:

∙ Length: 12.65mm.
∙ Height: 5mm.
∙ Width: 3mm.

Suitable for:

∙ Puch Maxi e50 Models.

Assortiment set Small Material Engine 53-Pieces Puch Maxi e50

∙ Assortimentset engine.
∙ Small material (Various common used parts for Puch Maxi)
∙ 53 Pieces.

Complete set with:

∙ 5x Woodruff key flywheel.
∙ 5x…

Start Mechanism set 3-Pieces Swiing Top-Qaulity! Puch ZA50

∙ Startunit / Start mechanism set.
∙ 3 Pieces.
∙ Swiing, Top-Qaulity!

Complete set with:

∙ Guide nut.
∙ Pull bolt.
∙ Starter cable.

Suitable for:

∙ Puch ZA50 Engines.

Grommet Start mechaniscm / Brake light Switch Puch ZA50

∙ Grommet / Rubber.
∙ For startmechanism, brakelight switch & sparkplug cable.

Measurements:

∙ Length: 45mm.
∙ Diameter: 19mm > 10mm.

Suitable for:

∙ Puch ZA50 Engines.

Gear Half Moon / Kickstart Axle Puch Maxi e50

∙ Kickstartgear / kickstartaxle.
∙ This gear is mounted in the kickstart clutch cover, the kickstartpedal is mounted on this axle.

Note! Photo 3 is a example photo.

Suitable…

Spring Sprocket Kickstart cover Tomos A35 / A55 / Puch Maxi Z50 / e50

∙ Kickstart sprocket / Kickstartspring.
∙ This spring is mounted in the kickstart clutch cover on the outgoing gear.

Note! Photo 2 is a example…

Spring holder Kickstart cover Plastic Puch Maxi e50

∙ Kickstart springholder / kickstartring.
∙ This spring holder is mounted in the kickstart clutch cover. and ensures that the spring remains in position.
∙ Plastic.

Note!…

Spring Kickstart Cover Puch Maxi e50

∙ Kickstartspring.
∙ This spring is mounted in the kickstart clutch cover. and ensures that the kickstart pedal comes back up after starting.

Note! Photo 2 is a example photo.

Suitable…

Shim washer Kickstart Cover 14mm x 10mm x 0.5mm Puch Maxi e50

∙ Shimwasher kickstart clutchcover.
∙ Placed on both Sprockets that fall into the crankcase.
∙ A Piece.

Measurements:

∙ 14mm x 10mm x 0.5mm.

Note! Photo 2…

Kickstart pedal Bended Chrome Puch Maxi e50 / ZA50 / Z50

∙ Kickstartpedal.
∙ Bended model.
∙ Chrome.

Suitable for:

∙ Puch Maxi e50 Kickstart Engines.
∙ Puch Maxi ZA50 Kickstart Engines.
∙ Puch Maxi Z50 Kickstart…

Kickstart pedal Straight Chrome Puch Maxi e50

∙ Kickstartpedal.
∙ Straight model.
∙ Chrome.

Suitable for:

∙ Puch Maxi e50 Kickstart Engines.

Kickstart pedal set Straight Black 3-Pieces Puch Maxi e50

∙ Kickstartpedal set.
∙ Straight model.
∙ Black.
∙ 3 Pieces.

Complete set met:

∙ Kickstartpedal Black.
∙ Rubber with Puch print.
∙ Mounting key.

Suitable…

Rubber Kickstart pedal with Puch Print Puch Maxi e50 / ZA50 / Z50

∙ Rubber kickstartpedal.
∙ Model with Puch print / logo.

Measurements:

∙ Length: 65mm.
∙ Inner diameter: 8mm.
∙ Outer diameter: 15mm.

Suitable…

Rubber Kickstart pedal Puch Maxi e50 / ZA50 / Z50

∙ Rubber kickstartpedal.
∙ Black.

Measurements:

∙ Length: 65mm.
∙ Inner diameter: 8mm.
∙ Outer diameter: 15mm.

Suitable for:

∙ Puch Maxi e50 Kickstart Engines.
∙…

Key kickstart / pedals 9.5mm / 43mm Puch Maxi / Citta / Vespa

∙ Key.
∙ 9.5mm model.
∙ This part is used for mounting a kickstart pedal or pedal arm.
∙ Universal.

Measurements:

∙ Diameter: 9.5mm.
∙ Length:…

Key kickstart / pedals 9.0mm / 43mm Puch Maxi / Citta / Vespa

∙ Key.
∙ 9.0mm model.
∙ This part is used for mounting a kickstart pedal or pedal arm.
∙ Universal.

Measurements:

∙ Diameter: 9.0mm.
∙ Length:…

Mounting set Kickstart pedal Puch Magnum X

∙ Mountingset kickstartpedal.
∙ To mount a turnable kickstart pedal.

Suitable for:

∙ Puch Magnum X.
∙ Puch Rough Rider.

Hub Kickstart pedal Puch MC125 / Magnum X

∙ Hub kickstartpedal.
∙ To mount a turnable kickstar pedal.

Suitable for:

∙ Puch Magnum X.
∙ Puch Rough Rider.
∙ Puch MC125.

Identical to Puch article number

364.1.13.341.1

Ball / Spring kickstart pedal Puch M50 / MC125 / Magnum X

∙ Ball / Spring kickstartpedal.
∙ To mount a turnable kickstart pedal.

Suitable for:

∙ Puch Magnum X.
∙ Puch MC125.
∙ Puch M50.

Identical to Puch article…

Spacer Kickstart pedal Puch Z50

∙ Spacer.
∙ Placed in the kickstartpedal.

Measurements:

∙ Outer diameter: 12mm.
∙ Inner diameter: 10mm.
∙ Height: 7.5mm.

Suitable for:

∙ Puch Z50 Engines.

Gear Axle Black Polished Puch Z50

∙ Gearaxle.
∙ With this Gear axle can the shift lever (inner) and the shift arm (outer) be mounted on the engine.
∙ Black Polished, to prevent corrosion.

Suitable for:

∙ Puch Z50…

Gear Axle Chrome Puch Z50

∙ Gearaxle.
∙ With this Gear axle can the shift lever (inner) and the shift arm (outer) be mounted on the engine.
∙ Chromed.

Suitable for:

∙ Puch Z50 Engines.

Original Puch article…

Kickstart Stop Kickstart pedal Puch 4 Gears

∙ Kickstartstop.
∙ Length: 60mm.

Suitable for:

4 Gear Models

∙ Puch DS50-4.
∙ Puch DS50V.
∙ Puch VZ50 (Met kort kickstart-pedal)

Original Puch article number

364.1.13.343.0

Spring Kickstart pedal Puch 4 Gears

∙ Kickstartspring.
∙ Internally engine.

Suitable for:

4 Gear Engines.

∙ Puch Alabama (4 Gears)
∙ Puch Dakota (4 Gears)
∙ Puch DS50 (4 Gears)
∙ Puch VZ50 (4 Gears)
∙ Puch…

Spring Kickstart pedal Puch 3 Gears

∙ Kickstartspring.
∙ Internally engine.

Suitable for:

3 Gear Engines.

∙ Puch DS50.
∙ Puch Alabama.
∙ Puch VZ50.
∙ Puch Dakota.
∙ Puch MC50.

Original Puch article number

∙ 364.1.13.334.1

Cooling cap Rear side Aluminium Puch X30 NG-2AH

∙ Cooling cap rear side.
∙ Aluminium.

Suitable for:

∙ Puch X30 NG-2AH.

Cooling cap Cylinder Aluminium Puch MV / VS / Etc

∙ Head Cooling cap.
∙ Aluminium.

Suitable for:

∙ Puch MV.
∙ Puch VS.
∙ Etc.

Identical to Puch article number

364.1.10.065.1

Cooling Cap Cylinder Aluminium Tomos 2L / 3L / Puch MV / MS / VS / Etc

∙ Head Cooling cap.
∙ Aluminium.

Suitable for:

All Puch Models with Forced cooling.

∙ Puch MS50V.
∙ Puch VS50.
∙ Puch DS50.
∙ Puch MV50.
∙…

Cooling Case Inside Tomos 2L / 3L / Puch MV / MS / VS / Etc

∙ Coolingcase innerside.
∙ For models with forced cooling.
∙ Aluminium.

Suitable for:

∙ Puch MV.
∙ Puch MS.
∙ Puch VS.
∙ Tomos 2L.
∙ Tomos 3L.
∙ Etc.

Ignition Grill Weighted Tomos 2L / 3L / Puch MV / MS / VS / Etc

∙ Ignitiongrill.
∙ Weighted.

Measurements:

∙ Outer diameter: 170mm.
∙ Distance between mounting holes: 148mm.

Suitable for:

∙ Puch MV50.
∙ Puch…

Cooling Case Outside Tomos 2L / 3L / Puch MV / MS / VS / Etc

∙ Coolingcase Outerside.
∙ For models with forced cooling.
∙ Aluminium.

Suitable for:

∙ Puch MV.
∙ Puch MS.
∙ Puch VS.
∙ Tomos 2L.
∙ Tomos 3L.
∙ Etc.

Cooling Fan Tomos 2L / 3L / Puch MV / MS / VS / Etc

∙ Coolingfan.
∙ For models with forced cooling.
∙ Aluminium.

Suitable for:

∙ Puch MV.
∙ Puch MS.
∙ Puch VS.
∙ Tomos 2L.
∙ Tomos 3L.
∙ Etc.

Identical to Puch…

Cooling Fan Ignition Summer Tomos 2L / 3L / Puch MV / MS / VS / Etc

∙ Coolingfan / summergrill.
∙ Summer model with big slats.
∙ For models with forced cooling.
∙ Aluminium.

Measurements:

∙ Diameter: 165mm.

Suitable…

Cooling Fan Ignition Winter Tomos 2L / 3L / Puch MV / MS / VS / Etc

∙ Coolingfan / Wintergrill.
∙ Winter model with small slats.
∙ For models with forced cooling.
∙ Aluminium.

Measurements:

∙ Diameter:…

Covering disk Air grid Tomos 2L / 3L / Puch MV / MS / VS / Etc

∙ Coveringdisk airgrid.
∙ Can be mounted with matching retaining spring.
∙ For models with forced cooling.
∙ Aluminium.

Suitable for:

∙ Puch MV.
∙ Puch…

Cover Ignition Chrome Puch Monza

∙ Flywheel / Ignitioncover.
∙ With Puch print.
∙ Steel Chromed.

Suitable for:

∙ Puch Monza.

Identical to Puch article number

359.1.10.065.1

Retaining spring Covering disk Air grid Tomos 2L / 3L / Puch MV / MS / VS / Etc

∙ Retainingspring for Afdekschijf / Stofdeksel.
∙ For models with forced cooling.

Suitable for:

∙ Puch MV.
∙ Puch MS.
∙ Puch VS.
∙…

Engine cover Plate Model with Crank axle Puch MV50 / VS50 / Florida / Etc

∙ Engine coverplate.
∙ For models with crankaxle.
∙ Aluminium.

Suitable for:

∙ Puch MV50.
∙ Puch VS50.
∙ Puch MS50V.
∙ Puch MS25.
∙ Puch…

Engine cover Plate with Logo Puch VZ50 / MC50 / Dakota

∙ Engine coverplate.
∙ Aluminium.
∙ with Puch logo.

Suitable for:

∙ Puch VZ50.
∙ Puch MC50.
∙ Puch Dakota.

Identical to Puch article number

357.1.10.064.1

Engine cover Plate with Logo Puch VZ50 / Dakota

∙ Engine coverplate.
∙ Aluminium.
∙ with Puch logo.

Suitable for:

∙ Puch VZ50.
∙ Puch VZ50-4.
∙ Puch Dakota (Models from 1969)

Identical to Puch article number

329.3.10.364.1

Engine cover Plate Puch 4 Gears / MV50

∙ Engine coverplate.
∙ Aluminium.

Suitable for:

∙ Puch 4 Gear Models with forced cooling.
∙ Puch MV50 (Models with high placed gear pedal to the leftside)

Engine cover Plate Rearside Plastic Black Puch 4 Gears

∙ Rear Engine coverplate.
∙ Plastic.
∙ Black.

Suitable for:

∙ Puch 4 Gear Models.g
∙ Puch 2 / 3 Gear Models (with adjustments)
∙ Puch MV50X-4.
∙ Puch…

Engine cover Plate Puch M50 Racing / M50 SE / M50 S

∙ Engine coverplate.
∙ Aluminium.
∙ Rearside.
∙ The models with a Crank something needs to be adjusted at the top.

Suitable for:

∙ Puch M50 Racing Kickstart…

Engine cover Plate Original! Puch MS50 / MS50L

∙ Engine coverplate.
∙ Aluminium.
∙ NOS Original Puch part! (may contain slight scratches)

Suitable for:

∙ Puch MS50.
∙ Puch MS50L.

Identical to Puch article number

050.1.1064

Spacer Crank lid M6 x 50mm Tomos 2L / 3L / Puch MV / MS / VS / Etc

∙ Spacer bolt.
∙ Placed behind the crank lid.

Measurements:

∙ Total length: 50mm.
∙ Length head: 14mm.
∙ Length thin part: 36mm.
∙ Screw thread:…

Spacer Crank lid M6 x 81mm Puch Monza / N50

∙ Spacer bolt.
∙ Placed behind the crank lid.

Measurements:

∙ Total length: 81mm.
∙ Length head: 47mm.
∙ Length thin part: 34mm.
∙ Screw thread: M6.

Suitable for:

∙…

Spacer Crank lid M6 - M5 x 90mm Puch MV / VS / MS / Florida

∙ Spacer bolt.
∙ Placed behind the crank lid.

Measurements:

∙ Total length: 90mm.
∙ Length head: 56mm.
∙ Length thin part: 34mm.
∙ Screw thread: M6 /…

Gear Axle Puch 3 Gears Footgear

∙ Gearaxle.
∙ Footgear.

Suitable for:

3 Gear Engines.

∙ Puch DS (Alabama)

Gear Pedal as Original Puch MV50 / VZ50 / MC50 / Florida

∙ Gearpedal.
∙ Model as original.
∙ Aluminium.
∙ Note! may contain minor damage.

Measurements:

∙ Diameter mounting hole: 13mm.
∙ Length: 120mm -…

Gear Pedal as Original Puch MV50 / VZ50 / MC50 / Florida

∙ Gearpedal.
∙ Model as Original.
∙ Aluminium.
∙ Note! may contain minor damage.

Measurements:

∙ Diameter mounting hole: 13mm.
∙ Length: 120mm -…

Gear Pedal Puch Monza / Grand prix / M50 Racing

∙ Gearpedal.
∙ Aluminium.

Suitable for:​

4 Gear Footgear Engines.

∙ Puch Monza.
∙ Puch Grand prix.
∙ Puch M50 Racing.

O-Ring Axle Gear Pedal 17.3mm x 2.4mm Puch 4 Gears

∙ O Ring Gearpedal axle.
∙ Placed behind the gearpedal.

Measurements:

∙ 17.3mm x 2.4mm.

Suitable for:

Puch 4 Gear Models.

∙ Puch VZ50-4.
∙ Puch DS50-4.
∙ Puch…

Rubber Gear Pedal Black with Logo Puch Footgear

∙ Rubber gearpedal.
∙ Black.
∙ With Puch logo.

Suitable for:

Puch Models with Footgear.

∙ Puch MV.
∙ Puch VS.
∙ Puch DS.
∙ Puch Monza.
∙ Puch Ranger.
∙…

Rubber Gear Pedal Black Remake Puch Footgear

∙ Rubber gearpedal.
∙ Black.
∙ Remake.

Suitable for:

Puch Models with Footgear.

∙ Puch MV.
∙ Puch VS.
∙ Puch DS.
∙ Puch Monza.
∙ Puch Ranger.
∙ Etc.

Key Kickstartpedal 9mm x 63mm Puch DS / VZ / R / M / SE / MC125 / MC175 / Etc

∙ Kickstartkey / Key kickstart pedal.
∙ For engines with kickstart stop to the outside

Measurements:

∙ Diameter: 9mm.
∙ Length: 63mm.
∙…

Mounting set Cooling cap Engine Puch MV / MS / VS / DS / VZ / Etc

∙ Mountingset for Coolingcap.
∙ As Original.
∙ Including manual!

Suitable for:

Motdels with Forced cooling from ± 1965

∙ Puch DS50.
∙ Puch…

Mounting set Shift housing Puch MV / MS / VZ / MC

∙ Mountingset shifthousing.
∙ Complete set.

Complete set with:

∙ 4x Mounting Studs.
∙ 4x Mounting Nuts.
∙ 4x Mounting Rings.

Suitable for:

2 and 3 Gear Footgear…

Switch Wheel Puch 3 Gears Handgear

∙ Switchwheel.
∙ For mounting the Shift cables.
∙ System with a continuous cable with a central lead.

Suitable for:

∙ Puch 3 Gears Handgear.

Identical to Puch article number

361.1.14.017.8

Switch Wheel Tomos / Puch 3 Gears Handgear

∙ Switchwheel.
∙ For the mounting of the shift cable.
∙ System with 2 separate cables.

Suitable for:

∙ Puch 3 Gears Handgear (the cable out of 1 piece is then replaced by 2…

Shift Lever Pedal Gear set Hand Shift -> Foot Shift Puch / Tomos 2 Gears

∙ Shift lever pedal gear set.
∙ Set to convert hand shift engines to foot shift.
∙ Stainless steel.

Complete set with:

∙ 1x Shift lever.
∙ 1x…

Shift Lever Pedal Gear Hand Shift -> Foot Shift Puch / Tomos 2 Gears

∙ Shift lever pedal gear.
∙ Set to convert hand shift engines to foot shift.
∙ Stainless steel.

Suitable for:

∙ Puch 2 Gear Models.
∙ Tomos 2 Gear Models.

Spoke set Shift Lever Pedal Gear Puch / Tomos 2 Gears

∙ Spoke set.
∙ Suitable for Shift lever Pedal gear.
∙ For the connection between the Shift lever and the select fork.

Complete set wit:

∙ 1x Spoke.
∙ 2x…

Rubber Shift Lever Pedal Gear Puch / Tomos 2 Gears

∙ Rubber.
∙ Suitable for Shift lever pedal gear.

Suitable for:

∙ Puch 2 Gear Models.
∙ Tomos 2 Gear Models.

Hub Kickstart Pedal Left Puch DS50 / VS50DZ / MC50 / VZ50

∙ Hub kickstartpedal.
∙ For mounting on the Leftside.

Suitable for:

∙ Puch DS50.
∙ Puch VS50DZ.
∙ Puch MC50.
∙ Puch VZ50.

Identical to Puch article…

Guide Disk Kickstartspring Puch DS / MC / VZ

∙ Guidedisk kickstart spring.
∙ Suitable for kickstart spring article number: 364.1.13.334.1

Suitable for:

∙ Puch DS.
∙ Puch MC.
∙ Puch VZ.

Identical to Puch article…

Gear Pedal Original! Puch 6 Gears / MV50-X2 / X50-4

∙ Gearpedal.
∙ Model with tapered fit on the axle.
∙ NOS Original Puch part!

Suitable for:

Puch 6-Gear & Later Puch 2 & 4 Gear.

∙ Puch MV50-X2.
∙ Puch…

Gearshift shaft with Select fork 2 Gears Tomos 2L / Puch MV / VS / MS / VZ / Etc

∙ Gearshift Shaft.
∙ Complete with Select fork and replacement bush for the Shifter cable.

Suitable for:

2 Gear Models.

∙ Puch VS50L.
∙…

Chain transmission / Drive 26 Links Puch Monza Grand Prix

∙ Primary transmission / drive chain.
∙ 26 Links.

Suitable for:

∙ Puch Monza, 4 Gears.
∙ Puch Grand Prix, 4 Gears.

Bearing bushing Start Sprocket Aluminium Tomos / Puch 2 / 3 Gears

∙ Bearingbush.
∙ For the start sprocket.
∙ Aluminium.

Measurements:

∙ Outer diameter: 19mm.
∙ Inner diameter: 14mm.
∙ Height: 9.5mm.

Suitable…

Driver Lever Shift Mechaniscm Vertical Puch 2 / 3 Gears

∙ Driverlever.
∙ For Puch Shiftmechanism with vertical elongated opening.

Suitable for:

∙ Puch MV50 2 Gears Footgear.
∙ Puch MV50 3 Gears Footgear.

Driver Lever Shift Mechaniscm Horizontal Puch 2 / 3 Gears

∙ Driverlever.
∙ For Puch Shiftmechanism with horizontal elongated opening.

Suitable for:

∙ Puch MV50 2 Gears Footgear.
∙ Puch MV50 3 Gears Footgear.

Securing plate Primary Sprocket 12mm New Model Tomos / Puch 2 / 3 Gears

∙ Securingplate primary sprocket.
∙ For the nut of the primary gear. (Sprocket with increased ridge)

Measurements:

∙ Outer diameter: 25mm.
∙ Inner…

Securing plate Primary Sprocket 14.5mm Old Model Tomos / Puch 2 / 3 Gears

∙ Securingplate primary sprocket.
∙ For the nut of the primary gear. (Flat model sprocket)
∙ Also to use as Sprocket securing plate.
∙ Without…

Mounting bracket Engine cover Plate Rearside with Nut Tomos 2L / 3L Puch MS / VS / Etc

∙ Mountingbracket rear engine coverplate.
∙ For Crankplate with high hole.
∙ Model with Nut.

Suitable for:

Models with 2 & 3…

Mounting bracket Engine cover Plate Rearside without Nut Tomos 2L / 3L Puch MS / VS / Etc

∙ Mountingbracket rear engine coverplate.
∙ For Crankplate with high hole.
∙ Model without Nut.

Suitable for:

Models with 2 & 3…

Catch bracket Chain Tomos 2L / 3L / Puch MV50 / MS50 / VS50

∙ Catchbracket chain.

Suitable for:

Models with 2 & 3 Gears.

∙ Puch MV50.
∙ Puch MS50.
∙ Puch VS50.
∙ Tomos 2L.
∙ Tomos 3L.

Identical to article…

Locking Strip Engine Tomos 2L / 3L Puch MV / MS / VS / VZ / DS / Etc

∙ Locking strip.
∙ To secure the engine mounting block bolts.

Suitable for:

∙ Puch VS50.
∙ Puch MS50V.
∙ Puch MV50.
∙ Puch DS50.
∙ Puch…

Mounting set Engine Tomos 2L / 3L Puch MV / MS / VS / VZ / DS / Etc

∙ Mounting set engine.

Complete set with:

∙ Bolts & Nuts (M8 x 70mm)
∙ Locking strip (to secure the engine mounting block bolts)

Suitable for:

∙ Puch…

Bolt set Clutch cover Stainless steel 7-Pieces Puch MV

∙ Bolt set clutch cover.
∙ Stainless steel.
∙ 7-Pieces.

Geschikt voor:

∙ Puch MV.
∙ Etc.